As time moves forward, the technologies used in electrical and electronic devices also advance. Boards and circuits become smaller in terms of dimensions and in some ways their sensitivity increases. There are many ways to protect electrical boards, one of which is to control the amount of potential difference that is applied to them. For this purpose, a voltage protector can be used according to the voltage range defined for the desired electrical device. These devices cut off the electricity if the voltage rises above a certain limit or falls below the permitted limit so as not to damage the device's board. This product is also one of these protectors designed to protect air conditioners. This product is produced by Behdad Electric Company. The delay time of this voltage protector is 30-90 seconds, and if the input voltage falls below 175 volts or rises above 255 volts, it cuts off the electricity. This product is connected to electricity through a plug, and with the earthed power outlet, you can connect the package plug to it.
During the transmission of electric current to the electrical device inside the house, many interferences occur, which causes a momentary change in the standard values of urban electricity, which can be mentioned as follows:
• Lightning
• Wind waves with static electricity
• Rainfall and wetting of wiring paths
• Using devices with high induction voltage such as welding devices
• The presence of defective devices in the house that do not have a constant amount of electricity
• Use of non-standard electrical devices
• Using high consumption appliances such as irons, vacuum cleaners, hair dryers, etc. during peak hours
Important points of Behdad Electric package protector:
1- Paying attention to the appearance design: one of the most important aspects that you should pay attention to when buying electrical protectors is the appearance design of the product, which must be practical. In other words, these products must be designed in such a way that besides occupying the least possible space, it is possible to install them easily and safely.
2- Attention to the quality of the outer shell: the use of first-class materials for the construction of the outer shell is very important. In simpler words, if high-quality materials are used to make the outer shell, in addition to increasing the beauty of the product, it also helps to make it more durable and long-lasting.
3- Paying attention to the quality of the brain: this matter has a much higher importance. Don't forget that anyway, the main mission of these transmission parts is safe and suitable for electricity and this aspect of production should not be ignored. Usually, ceramic and polyamide cores are of high and acceptable quality.
You are not logged in
Login to the site is required to post a comment